Customer Comments:
Hello Phil, Thanks so much for the update! I am itching to get these parts installed on my MLR in 22 magnum in the hopes that your upgraded firing pin will correct some FTF issues. I am quite confident that it will, as you all have built quite the reputation amongst the rimfire community! I learned about your exceptional products and pricing through rimfirecentral's forums, where you are widely considered one of the premier parts shops in the rimfire world! Thanks again for the great customer service and I look forward to dealing with you again in the near future! Happy Shooting! Nathan B . 10/11/2018
Couldn't wait for the new scope to come in so i slapped on a 4x Simmons i had. It will be getting a silver Nikon. Sighted in off the shoulder at 25 yrds with right quartering winds at 18mph. These are the first ten rounds i put through the completed build. Its a tack drive! STD 3/30/2019
Products are great building a unicorn charger for my daughter currently, then a target rifle for my wife and a zombie charger for me been busy pics to follow. Thanks Steve K. 4.14.2019
Hey Phil, Just completed the build on this 10/22
Magnum yesterday with a Boyds stock. I fired one full magazine through
it as fast as I could pull the trigger and it functioned flawless.
Mounted the scope on this morning and will sight in over the weekend.
At this point I am extremely pleased with the product. Thanks very much,
Carl G. 6/21/2019
Phil, this is the sixth one of your recievers that I have finished. All
have been extremely well finished and functioned flawlessly with match
ammo. I would like to see a carbon steel receiver with a color case
hardened finish . I recently finished one of your brass recievers with
an exhibition claro stock that is a real showpiece . Thanks for the
great products you produce. Wayne. 8/14/2019
Yes! I have received them and the machining of the receiver is wonderful. The speed of which the order was filled in was amazing as well. Thanks again, (this is my second one)- John 8/30/2019
Phil - Thanks for the follow-up. Very professional...more folks should do the same. The receiver and center locator appear to be well made, quality pieces. I just haven't decided, yet, whether I want to fully take on such a project. If I do, I'll likely be ordering your tooling kit, and probably alignment jig, too. Remains to be seen. Thanks, and regards. Robin 9/8/2019
That is mighty nice of you. Just wanted to let you know the firing pin worked beautifully. My magnum was misfiring every other round before. Not one misfire now. Thanks for a great product! Jamie W. 11/7/2019
Hi again Phil -I scored a "new" take off single extractor Ruger Magnum barrel (USPS still hasn't found the other one) and got the gun together! I attached a couple pix so you can see how it turned out! Range report - just under 100 rounds fired, flawless! MaxiMags and V-Max worked perfectly, some Aguila I bought won't chamber (it's the ammo, NOT the gun, need to get out the micrometer!). I had a 7/8" long steel bushing pre-compressing the top spring, that worked fine (ejection was perhaps a bit overly aggressive), also was fine with the stock spring and no bushing, so I guess it's fine either way? The other odd thing I noticed is that the first (and ONLY the first) round of each magazine has very slight bulging of the case face - all subsequent rounds were perfectly flat... any idea if that's an issue of concern? Overall, I'm impressed with the results! Thanks Dave B. 11/27/2019
Love your product, but haven’t had time to put it together. Will give a full review when finished! First observations though are you need better instructions on the jig placement for drilling and the video goes to fast to show the jig placement, a source for the heavier spring ( if needed) for the .17. The quality of the material is outstanding and a great idea to fill the void in the market place. Will be keeping you updated ,once we finish the project. Thanks again for a great product Bruce M. 1/3/2020
Hi. received the barrel last evening. Assmbled using the 2.7 spring trimmed and the tungsten slug. Tested this morning.No problems. It runs.. Receiver and bolt very well made. Fixture and drills I recommend. (Sharpen the drill bit) I could have bored the barrel hole in a lathe with a mill fixture, but having a mill with XYZ and DRO all holes were done in the mill. I was surprised that it ran the first time out. Excellent product and well worth the money. I wish I had known about this 10 years ago. Thanks, Phil, and have a great week. My nest build may be a 17 HMR Geri. 4/23/2020
I bought the parts for a customer. I only opened the box to make sure shipment was complete. From what I saw it was a nice milling job. James D 4/25/2020
So, it's not completely "done" yet, still gotta do the stock screw hole, but I just got it mocked up and marked, can't wait to get her to the range! Also, the skunk stripe is still there. A bit of DuraCoat will take care of it, in time. Thanks so very much! This flat-top will be perfect for the irons-only ranch-style plinky carbine! Your Razor's lines are absolutely perfect for a factory-esque style build. CK 5/7/2020
I am sorry to report that despite this rifle's excellent accuracy, light weight, and phenomenal looks......I have been unable to spend enough time out shooting it. I'll be spending some time outside Nucla, Colorado this summer and I expect to be splattering prairie dogs and gophers in local farmers' fields! Boyd stock is absolutely gorgeous. I believe it was one of your scopes...My friends are very envious! I'm between conference calls, at the airport. I'll try to remember to put a review on your site, tonight. Have an excellent day, Craig 6/1/2020
Phil, Many thanks for the care, communication, and speed in delivering Order #AB-99--. This veteran highly appreciates your "attention to detail." Mike 6/6/2020
The receiver drilled nice, I added etched ons in stock, and threaded through buffer pin in back. This greatly improved accuracy. This is an extremely accurate 10/22, as all parts are Brandon B. 6/10/2020I am a veteran,and I'm building a Brownells takedown charger for plinking but I must say, so far this is the fastest service I've got from any vendor,my hats off to you. Terry P. 7/6/2020
In this specific situation, the speed of delivery was not critical. I will not be able to immediately build a 10/22. Two reviews were left for the "80%" Razor receiver and the 9th generation (G9) Razor drilling fixture or "jig." Hopefully they prove helpful for your business. Reviews for the other products purchased will be delayed until proper testing/use has been done. Only a brief visual inspection, for obvious defects, was done. Again, thank you for your quality customer care and products. MCL US Navy 7/11/ 2020
Just a short note to let you know that I was completely happy and satisfied with the Auto Sear Trip for my AR-15, purchased through Select Fire. Thank you again for a fine product. Mike F 7/13/2020
Got the parts today and got them installed. works perfect..thanks Ashley W. 8/5/2020
Hello Phillip! I wanted to share this with you, well like always I was having trouble with the barrel hole and think because that bit was to long and i couldnt get it into my vice, well to make a long story short I use these Titanium Nitride hight speed steel step drill bit the one in the middle or the one on the side for the first cut and it worked great, I drill to the top step just a little then stop then I used the other 11/16 bit to finish the job it turn out perfect, sending a photo of the drill bit that i used, I thought you might want to pass this along to other customers, thank you.. Rex A. 10/29/2020
Many tire kickers out there may be thinking about building a 10/22 but may be reluctant for fear of screwing it up. Well this review is from a guy who did just that. My first attempt, I screwed it up and the rifle would not shoot a round with the magazine in. But don't let his stop you because the good news is I was amazed at how easy it was to fix it. Thanks to Phil from Sure Fire, I learned that I had drilled my barrel .030 too low in the blank receiver. So faced with making a paper weight out of it, I thought what do I have to loose. I brazed the hole shut with aluminum rod and If I had been more careful, you wouldn't even know I did it. Then a more careful job of redrilling the hole and the end result is a new rifle that runs like it was supposed to. So by all means, be careful the first time and take extra time to do it right but if you do screw it up, the fix is pretty easy. Thanks to Sure Fire for the help. Marty L. 11/22/2021
Just wanted to let you know that shipment was delivered. Sure does look nice. I was impressed with the packaging, shipping time, communication and product. I do plan on building a 10-22 magnum later on, but for now, this will do as time constraints on other things. Love what you do for the builders. Thank you again. Milton H 11/29/2020
"Very nice quality receiver. Machine work is excellent. Fit and finish is excellent. The tooling was cheap which is what I expected for the cost but more than adequate to complete a few receivers. I had zero issues with this project and it resulted in a very nice shooting rifle. I have already ordered more." Brad M 1/6/2021
Hello again Phil, I thought I'd drop you a line or two to let you know about the trip I finally had at the range yesterday. Thanks to you both the 22mag and the 17HMR performed flawlessly. I installed the follower on the 17 and after tuning the mid weight spring it rang out like a song bird for a entire box of Hornady no jams or failure to feed. Absolutely no issues at all. At 50yrds I was able to dial it into 1in groups of 3 The 22WMR was just as easy. I used the heaviest weight spring and the kit follower and wound up blowing through around 24rds of CCI without so much as a hiccup. Unfortunately the 3x9x40 is messed up so I couldn't sight it but I'll let you know when I get new glass and make it back to the range. The 22lr worked without having to do anything to it and that was using older Remington yellow jacket bulk ammo I had laying around so I am willing to bet quality stuff is gonna feed like a beast. Lol At 50yrds with this thing I was able to to get around half inch groups of 3 and more than once punched the same hole as the previous shot. All in all I couldn't be happier and just wanted to let you know how much I appreciate your product and your help in getting them together. Thanks for everything and I look forward to talking to you again soon. I'm already planning another Razor build for my 8 yr old neighbor. He was with me yesterday at the range and fired for the first time in his life. He must've asked 100 times when we can go again and if I'll let him help me work on what I have in the shop. I'm thinking if I show him how things work and walk him through a build of his own maybe there's a lil more hope for the future. Take care hope you are well and stay healthy. Norm 2/1/21
Howdy Phil, Hope this is finding you well. Regarding the gear I got from you, I received it in good order. Thanks for the pin sets by the way. As advertised, the receivers are just a step above what Bill Ruger has on offer. I work with 'the gunsmith of last resort' here in LA, and he is the last word in all things 10 22 and beyond. We take in work from all over the US. He took one look at your stuff and placed his own order... ordered your jig and cutter set then and there (no such thing as too much tooling is our motto). Brother K. 3/6/2020
I just wanted to write you a review since completing a razor receiver. I’m satisfied with the design and quality of the receiver 100%! The drilling work isn’t bad for the buffer, trigger, detent, and v-block holes. Jig work wonderful for those. I’ll say the hardest parts are the barrel hole and the magazine hole. Precision and good equipment are the key here. The jig helps but measure a thousand times. Not a fan of the barrel reamer, think that caused me more headache than anything. I did use some JB weld and some hand filing to get a good tight straight fit on the barrel. Magazine hole is some of my fault, the jig and that long bit, gotta be extra careful that the bit doesn’t walk with you. Done a JB weld fix with that, but may do a different fix later on. Overall, I’m pleased 8 outta 10. This is definitely not a build for someone with limited knowledge in guns and tools, I consider myself very skilled in both and had to still improvise some. May do a second one later on and consider my first one a learning experience!Thanks! Lee B. 3/14/21
I finished my first build using a Razor 10/22 receiver mounted in a Hogue OverMolded Rifle Stock Ruger 10/22 Standard Barrel Channel with a 16.5" BLUE - 1:16 TWIST - FACTORY TAPER BARREL THREADED 1/2- 28 TPI FOR 10/22® WITH THREAD PROTECTOR. Also sporting an inexpensive Bushnell red dot sight. This ones for my daughter who enjoys working with me in my humble shop. It was a joy to work with the quality of the Razor and accompanying parts. The tools/drill bits are excellent, all super quality. The barrel came out so perfectly straight following your instructions! As a novice in gun smithing 101 I’m having a great time getting my feet wet and making some really cool rifles! Tom. 4/10/2021
Received items in record time all is of excellent quality thank you. Jim 4/20/21
Thanks, I recently purchase a .22 LR reciever, bolt etc. and finished it and I am very pleased with it. Ron 1/10/2018
This was my first build in 2013. Had a lot of fun building it and it became everyone’s favorite rifle. After a lot of pleading I said I would build another one. So I ordered another receiver. Haven’t got it yet but am looking forward to building it. I hope it goes as well as the first one Sent from my iPad D. Peterson 8/27/2018
I received the part that I ordered. It looks well made and was a perfect fit for the rifle. I have not had the opportunity to test fire the rifle. Once I do I will let you know how it works. Thanks for the follow up email and I will continue to do business with you in the future. Robert T 2/26/2020
Hey Phil this is Norm Thayer, we spoke on the phone a couple of times about the 17HMR and 22WMR builds I was in the middle of. I just wanted to let you know I got the follower and springs and finally had the spare time to put it all together. 1) The first two pictures is of the 17HMR (silver receiver) I went went a Butler Creek barrel your receiver and parts with a standard trigger pack that I did a little custom work on to get down to a crisp 2.75lbs. A Ruger wood stock that I had laying around for awhile and a regular 3x9x40 scope. 2) The next two are of the 22WMR (black receiver) it's got a 16in threaded barrel but I cannot remember for the life of me by who. Of course your receiver and parts and a standard trigger pack that I got down to just under 4lbs and a extended mag release lever. I used my other Ruger wood stock and another 3x9x40 scope. Both stocks I did a rechannel to use the .920 bull barrels and bedded them to be almost free float. The only thing I'm missing is the barrel band on them and I'm considering customizing them either the Ruger clamp style or solid one piece aluminum. Any suggestions? I do have a 22LR build to show you as well but I'm having to email you from my cell phone and for some reason it tells me the pictures of it make the email too large to send. I hope you don't mind but it'll be a separate email sent after this one. Thanks for all your help and information I'll be letting you know how they act as soon as I can get them to the range. I really hope you had a Merry Christmas and my best wishes for a great new year to you and yours. Thanks again N. Thayer 1/1/2021
Hey Phil,I received the drill and it is going to work it great. I want to thank you for doing that for me. Please see attached picture. I am sending out a check for the blemish and shipping we had discussed when we spoke. I am looking forward to completing both. Let’s all hope our “ great” leadership doesn’t do foolish things down the line. Again thank you for all the help along the road. Sincerely P. Sawyer 4/20/21
Phil, p.s.-just finished my first Razor--love your work!!! Douglas E. H Jr.
HI,
Thanks for the instructions you sent, much appreciated. Received my
goods the other day and looks fantastic on my shelf. I went onto
your website today to order an anodized version but your sold out.
Can you possibly drop me an email when you have these in stock? I
presume it is just a simple black anodizing you do? Many thanks for
an awesome looking piece. James SA 9/3/09
I ordered one of you 10/22 80% receivers, i am completely happy with this receiver it is very well made. However when i went to finish machining it i got coolant on my blueprints that i received with it. Could you please mail me some more or even email them to me so i can finish my project? Thanks Cody H. 9/11/09
Just got around to opening the boxes and I must say, the workmanship on the receivers is incredible! The machined aluminum finish looks great as is. I haven't measured anything out but I think I can trust it as it fits my Hogue stock perfectly. I am very pleased with the Razor receivers and look forward to the build. Thanks again, Leonard CA 9/28/09
I work as a machinist and can say that the tolerances are tighter and
better fitting than a stock receiver and that this is a quality
receiver. Customer service is great rapidly answering all questions. I
could not make a better one my self. TX
Phil,
I received the receiver today and I gotta tell you what an absolutely
beautiful product!!! I couldn't be happier with your product!! I would
of paid $500 for a receiver of this quality and craftsmanship and for
the price, you'd have to be nuts not to purchase this receiver! Again,
thanks so much and rest assured you have a customer for LIFE!!
Sincerely,
Lucas G. MI 10/2/09
Thanks Phil I got it yesterday, I wished you could provide more parts, you do a great job! Mike TX 10/3/09
The receiver I got from you guys is a beauty. After some sanding with some 600 grit sand paper it shined like a diamond. The parts all dropped right in perfect fit. These are good quality receivers. I wasn't able to get mine anodized but I'm going to order another one in black soon. John A. 10/5/09
Phil,You were right - I received the order earlier today. You guys do fantastic work. Thank you very much. I will probably be ordering from you again. But, in the meantime - I will make sure to that I let people know how good your stuff is. Best regards, Tom P. CT 10/16/2009
I just got my Razor in the mail today and I am very impressed. The quality of this receiver is exceptional and the price is unbeatable. Not to mention fast shipping as well. I'm glad I got mine now because I can tell you're going to be flooded with orders when words gets out about your work. -Dave NJ 12/23/2009
I just got my threaded barrel and comp yesterday, and was amazed by the quick turn around time of the sales transaction to my front door in less 5 business days ! Very impressive ! I shoot mainly for quick target acquisition rather than precision, and was really glad to hear that you guys were able to open up my barrel to shoot most bulk pack ammo out there, "free of charge " !. 'Heck, I tried getting that same request from Tactical Solutions and was told they didn't offer that service.' I was also amazed on how light your Dominator compensator was ! Great customer Service ! Thank You ! Jesse, VA 1/22/10
Dear Phil
I received the package today. USPS mail is quite reliable and fast.
The quality of your products is amazing(5 star). Can you thread another
barrel for me with 1/2 UNF 20 TPI and same thread compensator.
Regards
H S Sandhu 2/1/2010
Dear Select Fire,
I purchased one of your extended black anodized receivers. I really like
the quality of the work and am looking forward to completing it.
Kevin B
Hi Phil
I've just finished my receiver and test it. I'm very satisfied of the
result. I've ordered 2 other receiver.
Thanks a lot
Younes (France) 3/7/2010
just received my Razor and all I can say is WOW!
Worth every dime. Jeff (California) 5/7/2010
Hi Phil, just wanted to let you know that the gen 4 receiver is a complete success. It works flawlessly and the fit of all parts is top notch. I am very happy with it, and any I purchase in the future will be from your company. Thanks for posting my rifle on the website, kind of prestigious for me. Also, I am very happy with your service as well, I will recommend you to everyone I can. Thanks, Mark. June 8, 2010
Hello Select Fire, The parts received today offer very fine workmanship. Close tolerances and finished product. Shipping was spot on and fast to Canada. Emails were replied to quickly. Excellent work, shipping and communications. Good guys on the other end of this website! 100% quality in all areas of business... KW Canada 7/23/2010
Hi Phil,
I just received my order, thank you very much for upgrade!! the receivers are awsome, very nice product! I'll buy 3 other soon ;) you do a great job. Thanks.
Stirling from France 8/14/2010
Hello
I have ordered a Razor Receiver an I am very satisfied about this
product.
Thank you very much for the great quality products. A 8/22/2010
USA
By the way the gun shoots amazing and everyone asks
where i got the reciever and what kind of gun it is
since it doesn't look like a 10/22 at all.
thanks again,
matt USA 11/22/2010
Hi Phil,
I am happy to tell you that the stainless charging handle and spring assembly that I ordered on the 11th November was delivered today. Pretty fast considering it was exported to the UK and Thanksgiving intervened! I have fitted it within an hour of receiving it and am looking forward to testing it at the range tomorrow night and at the Welsh Gallery Rifle Championships on Saturday.
Regards
Bob . ABERGELE, UK
Thanks for the 80% receiver and kit, I
was able to complete my project over the weekend. Pros:
receiver is made from quality aluminum, drill bits are also
very good
Eugene
Your Welcome on the pictures and I see that you have already placed them on the site. By the way, I have tested both receivers with .22 Magnum and .17HMR barrels and they performed perfectly. All I need now is a nice and warm enough day to go and sight them in.1st day it gets above 40º, I’ll be out with both rifles. Ted 1/27/2011
Phil, Just wanted to
thank you for an excellent product and customer service, the
receiver was easy to finished and functions flawlessly. I
actually had it jam less with cheap ammo than the factory
receiver with the same parts. If there were ONE thing I would
change, its the addition of a dovetail scope mount on top of the
weaver. Thanks a ton. Jonah 1/31/2011
I received the new parts yesterday and they look good.
The additional parts you provided were an unexpected but great
surprise!
Thanks for your help.
-gary 1/28/2011
I just got the 2 blanks as well as the fixture and other small parts. Everything looks great. Should be pretty simple to complete. Thanks again for the extra parts and I'll be contacting you again soon to buy the rest of the components. Phil 2/7/2011
Phil, I just want you to know that only yesterday that i was able to zero and shoot my razor 10-22. First of the rifle is mostly made of parts from you the razor receiver, the barrel, bolt buffer, firing pin, take down screws. The receiver is very tight some say it's comparable to match receiver. After zeroing it at 50 yards using CCI standard velocity we started shooting targets at 140 yards our targets are 3x3 inches of steel plates. Another thing is shipping of ordered items is very fast.
Phil,
I just whan't you to know that only yesterday that i was able to zero and shoot my razor 10-22. First of the rifle is mostly made of parts from you the razor receiver, the barrel, bolt buffer, firing pin, take down screws. The receiver is very tight some say it's comparable to match receiver. After zeroing it at 50 yards using CCI standard velocity we started shooting targets at 140 yards our targets are 3x3 inches of steel plates. Another thing is shipping of ordered items is very fast. 10/16/2011 thanks, Pot
Dear Phil, This is the second time that I deal with your company, the speed and professionalism in handling my order keep on impressing me! Thank you very much. Nic Roets
I completed this Razor Magnum for Rick as a partial return for all the help he's given me on my house. Rick has been hunting prarie dogs in NE Montana the last two years with a Savage 93 17HMR bolt rifle. I knew if we could pull the build off and get everything running right in your Razor Mag. the dogs will be in big trouble next year. Heck, I may even go and spot for him. Brian L.
Hi,
I'd just like to comment on Your service. It's among the best I've
experienced shopping on the Internet, and I do a lot of shopping on ebay
and others. The service is great, shipping is quick and easy and prices
are reasonable. I will highly recommend You to others.
I just received my RAZOR Receiver Blank Anodized Black Extended Rail,
and it looks great. I seems You were out of the non-extended rail
receiver and just replaced it with the one I just got in the mail. I am
so very impressed that You did replace it without questioning. Now that
You did, I think I will order a couple more of those later for other
builds. The Extended Rail receiver looks very impressive, and I am
looking forward to finishing it. I will send You pictures when the Razor
10/22 is finished B. J. NORWAY
AWSOME Phil, Thanks so much for leading me in the right direction. You have been a great help. I can't wait for the tooling to come so I can get started ion this great product. Shawn M. 4/1/2012
Phil, I bought the receiver partially finished. The receiver had yet to be bored and reamed for a barrel. I used the opportunity to thread a spare Butler Creek barrel to the receiver. Shoots like a dream. 4/1/2012 Regards, Jeremy
This is a nice a product that I wish I had known about a few years back. Your instructions and tools made it easy for my son and I to build twin rifles. Thank you.. Jeff Jonners 4/2/2012 Ohio
Hello Phil...just finished my build yesterday....receiver was awesome! so was the shipment and the labels on the pacage..... shot it yesterday around 50 rounds!...thanks and keep up the works!...will be sending you pix and yes will be ordering more parts soon...regards Sent from my ASUS Eee Pad DR. B 4/19/2012
Phil, I finished it today. It took me quite a while to work up the courage to drill the barrel hole, but once I decided to go ahead, I finished the thing in 4 days. I did it all myself, and only used my drill press and your drill guide. Once it was set up square, and anchored to the table, I used a 1/4 inch bit to drill a pilot hole, then slowly drilled in 1/16th increments until I hit 11/16. The drill guide is a life saver. Everything fell right into place when I assembled it. Thanks for a great product. Robert B 5/10/2012
Hi, I'm really enjoying my RAZOR Magnum receiver. It is fitted with a
Shilen match barrel, Volquartsen trigger assembly, Clark Custom Guns
stock. Thanks, Reggie R. (7/20/2012)
Solves my problem
of what to do with a large box of various 10/22 parts accumulated over
the years. I really don't want to pay what the aftermarket receiver
manufacturers are getting for match-quality equipment, and then have to
pay a stupid "transfer fee" just because it has a serial number.
After the initial investment for the tools and the jig the price of the
RAZOR receiver is reasonable enough to build a low-priced fun-gun, and
the workmanship is top quality. Ed B. 8/20/2012
Phil, Just received my order today. Thank you for the fast shipping. I was not in a hurry to do this project but after examining your impressive workmanship I can't wait to get started. Thank you for the unexpected extras. Rest assured that I will do all in my power to promote your business. You are a real class act. Bruce S. (9/22/2012)
Hi Phil, I received the magnum receiver last year I was too busy to work on it. But now I've got the work done. I don't know if you remember that i wanted to use the .17 hmr with it. Well anyway I have fired a about 8 rounds with it and it works great. Thanks Jimmy W. (11/2/2012)
Hi Phil,
I just wanted to let you know that I received my order today, man that was fast. So fast that I haven't even finished shopping around for the other items to complete these! Everything was in perfect condition, and no damage to the contents. I received the adjustable v block kit instead of the standard v block kit and appreciate the upgrade. I think that this is going to be a fun build, and think that this is an excellent start. I will review the material that you sent as well as your tutorials and hopefully soon will sit back and say, "I built this with my own hands." Many thanks again, Stephen 1/9/2013
I just finished my first of many to come, love the razor and will be
using more than just the receivers I want to support your company in
every way that I can.
Thank You. J.C 1/18/2013
Having almost no experience with a drill press. I was able to complete the receiver without problems. I followed the instructions on the drill fixture and build instructions pages and turned out a perfectly working receiver. Of course, the most difficult part was the barrel hole; but with the angle finder and patience it went flawlessly. I've fired off several hundred rounds from varying manufacturers and have yet to get a malfunction. I am truly impressed. Thank you so much for making a great product. I will send pics when I get the stock painted. Mark 1/19/2013
Thanks just thought you should know, as your product is top quality. Irv 3/29/2013
I really enjoyed building the Razor 10/22 receiver I ordered from you guys. The quality of the 80% receiver was outstanding right out of the box. The drill jig and bit / tap kit are absolute must haves for anyone looking to complete one of these receivers. All high quality equipment and made the job of finishing the receiver very easy. About the only complaint I have, and it's my fault, is I ordered the anodized receiver and I really should have gotten the raw aluminum as I'm planning on painting the rifle in the near future using Duracoat firearms finish and the prep work would go faster had I ordered the unfinished receiver, but as I said, that's my mistake. Live and learn I guess. Right now I have the rifle about 85% complete. What I have left is mostly cosmetic stuff I want to do with the rifle. I have taken it out and shot it several times now, and other than some minor finish sanding / polishing to some of the internal fire control parts, it's turned into a very nice rifle. I am attaching some pictures I took while finishing the receiver, as well as what the rifle currently looks like minus the scope I recently purchased for it. Jason W 4/16/2013
Hi Phil, A follow up? Now that is service! Just what I would expect from a company that makes a high quality product like the Razor! The items arrived very quickly and the build went smoothly. I did save the barrel hole for the mill but the rest I did on my drill press. Now I am thinking about a Razor 22 Mag! Thanks Steve 4/16/2013
Phil, Everything arrived on Tuesday and as of yesterday, I've completed all but two holes. I expect tol finish it up after work today. I manage a Tool & Die shop with CNC EDM and milling equipment so can say that the exterior finish of your 80% receiver is excellent. Interior surfaces are not as "finished" but are certainly fine. I'm looking forward to completing the build this weekend and taking it to the range for trials. Packaging, quality and price are all quite good and I will probably be buying additional 80%'s in the coming months. Thanks, Michael 4/19/2013
I have built a .17mach 2 10/22 I will post a pic when I snap a photo. The 1st receiver I did the barrel hole wasnt quite right so it was a failure and un useable. The 2nd I had a Gunsmith friend do the barrel hole with a Mill/lathe .It turned out perfect. i did the remaining holes with a mini drill press with 123 blocks. I took it out yesterday and fired 10 rounds. I did polish the inside of the receiver. It has a Hogue 920 stock, Kidd bolt, Kidd 1 stage trigger, Volquartsen Mach 2 Carbon Fiber lite weight barrel and Power Custom Magnesium Heavy bolt. Its very smooth and shot 4 inch groups at 100 ft free hand. Kinda wish it fit my Nordic stock or Troy stock but still very happy. Bill 5/19/2013
Phil, Sorry it took so long to get back to you. I finally got the razor build done and am very satisfied with the results. The jig and your instructions made for a very easy build. The gun has run without a hitch so far. The only problem thus far is the retaining e-clip came off the charging handle, just makes assembly a bit more challenging. Hopefully I will get a picture for you soon. Keep the great products coming. Brent S. 6/1/2013
good quality products. completed set for .17 hmr and it works like a charm. went slow with recoil springs trimed only 1 round at a tme off springs and a half round on the last trim. used a small piece of soap stone tied to the bolt handle to mark travel upon firing. made good reference on receiver and wiped right off when done. cleaned after 30 rounds - no problems. am going to set up for .22mag. but will need an additional set of springs as chamber is much different. a whole lot of bang for the buck and I know it will come in very handy! Many thanks BJ Buskirk 6/3/2013
Hello: Thanks for your fast shipping, I received my receiver today...This is my second one, I got hookrd on the first one and had to build another. A great product......Thanks Jesse 6/27/2013
Hey Phil, Everything is great – excellent quality but I knew that and that is the reason for my purchase…and thanks for the hat! -Christopher 6/27/2013
Greeting ! Purchased all the parts I needed to complete My 10/22 build , including the receiver jig. Everything Went together perfect and could not have been Easier! Thanks for all the help ! Taylor 7/11/2013
RECEIVED ALL PARTS, AND DRILLED OUT RECEIVER. COME OUT EXCELLENT . WAIT ING FOR PAINT ( DURO COAT) TO DRY. TAKES 3 WEEK . YOUR PRO DUG AND DRILLED KIT, JIG ARE THE BEST OUT THERE.WILL SEND PICTURES WHEN DRIED, THANK YOU JIM FROM GUNSITE. James 4/28/2014
Hi Phil, Thanks for the great jig and bit kit! My first receiver worked out great. I thought the barrel hole would be the hardest but for me it was the v-block holes. Mike 3/21/14
Couldn't have done better as far as the craftsmanship Phil.. very
pleased with what you sent me. This will be a family heirloom for a long
time. Sincerely pleased!
PHIL A 12/18/13
The parts that I ordered from you, are a very fine quality, and I look forward to getting the time to take them out to my garage, and setting them up in my milling machine to finish them. Thank you Bradford P 9/21/2013
Great product. I'll send a picture of my AGP Arms-based takedown Razor 10/22 which uses the Razor 80% receiver I got from you guys in January: Gary M. 4/20/2015
Hi, The receiver worked out great and I have test fired it and it works perfectly. Quality was very good and I have a lathe and mill so it was easy to complete. Dennis M 6-28-15
AS usual good selectfire quality an attention to detail,works fine. Retired and Happy 7/28/2015
hello I just got it yesterday very nice receiver this is no. 3 the other 2 work just fine thanks. Bernard G.. 8/13/2015
Phil, I just received my barrel back. It looks great, thank you for the sterling service and the thread protector. Neale 8/28/2015
Totally amazed at the promptness of shipping. This is a quality made product which is easily installed or removed from your carrier. Although it adapts the AR-15 carrier to act like an M-16 carrier, it also adds weight to the bolt carrier assembly. Rick. 9/26/2015
The barrel hole locator is an Awesome
little tool. Made centering the barrel on the 10/22 80% receiver a
breeze. Very well designed and quality material. Tom W. 10/2/2015